Springfield Hellcat Holsters

(5 customer reviews)

$64.98

Springfield Armory Hellcat holsters
| Outside the waistband | OWB |
| Inside the waistband | IWB | concealed carry kydex holsters |
Please check out | Holster Type FAQ |and the |Vlog | for information about our products
More information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page
Current estimated shipping times 4 weeks
Shipping times are estimates not a guarantee
Order Other SA Holsters here
Please read the description at the bottom of the page
Made in America

Description

Springfield Hellcat Holsters

The DME Holster’s Springfield Hellcat holsters is made in America. The SA Hellcat IWB holster is perfect for concealed carry CCW inside the waistband IWB and outside the waistband OWB. Because our holsters are purposely designed and custom made. Holsters can be carried at 3 to 4 o’clock. Or can be ordered for appendix carry.
Used with the nylon injection molded belt clip or soft loops. DME holsters offers a non tuck-able and tuck-able easy on and off holster. Because our Springfield Armory holsters are designed to be a perfect fit for the Springfield Armory line of firearms. SA Hellcat IWB holster

So from the new SA Hellcat 9mm to the SA EMP9 SA XD Mod2 XDs Mod2. As well as the original SA line of firearms. Order any Springfield Armory holster here. DME Holsters also makes holsters to accommodate RMR Red Dot sights. Crimson Trace lights and lasers, Laser Max, Stream Light TLR series and the Olight PL & PL pro series of lights and lasers. In addition you can Order any custom IWB OWB holsters here

We also offer holsters for the:

Safariland QLS System and BladeTech Tactical Modular Mount System TMMS
Stream light TLR 6 TLR 1 TLR 2 TLR 3 TLR 4 and other rail mounted lights.

Springfield Armory Hellcat holsters can be ordered for concealed carry CCW. And outside the waistband for an open carry holster. They can be order straight up and down at 0° cant for appendix carry. Or with approximately 15° cant for 3 o’clock or 4 o’clock carry. For extra concealed ability you can order the Mod Wing. The Mod Wing is a piece of concealment enhancing hardware, and it allows a user’s belt to apply additional leverage to rotate the holster and the grip of the gun towards the body. Therefore creating better concealment and less printing of the firearm. Interchangeable inserts allow the user to choose a strong medium or mild rotation, based on the user’s attire.

Need more information please text  520 815 6940 Call 520 815 6940 or send us an email. sales@dmeholsters.com or you can use the Contact Us Page

Just a quick word about shipping times we are a small company and most the stuff that we do custom work. We offer a quality product at affordable prices that is in high demand. Holsters are made on a first-come first-served basis. We try to update our shipping times once a month. We get multiple phone calls requesting to be moved to the front of line for some extra cash that’s just not something that we can do. Orders are completed in sequence unless something is on back order i.e. you order a custom color.

The Hellcat holsters are made out of  black .080 Boltaron or Kydex. It’s very strong, has excellent durability, scratch resistance, and good definition. Springfield Hellcat IWB holsters SA Hellcat IWB holster

Holster Type FAQ

All Springfield Hellcat Holsters come standard with:

  • Made with Black .080/.093 Boltaron or Kydex  View Colors/ Patterns here
  • Nylon belt clip your choice 0° appendix carry, or approximately 15° FBI Cant
  • 1/2″ sight channel for suppressor co-witness sights
  • Sweat guard
  • Adjustable retention
  • Standard screw set
  • Made in America
  • Hellcat Holster

Holster description

Standard IWB

Use: Concealed carry, Non-Tuckable, Comfort level 7
Concealability 8 (add the mod wing you could push it to 9.5)

The Standard IWB is a “Taco” holster designed to be carried at 3 or 4 o’clock with 15° cant. However, can be ordered at 0° cant for 1 o’clock appendix carry. Holster is non tuck-able, what this means is that you cannot tuck a shirt in over the gun. It’s designed to have a shirt hang/drape over the holster. All DME Holsters are designed with a full sweat guard, inside mag release uncovered, adjustable retention, trigger guard covered, and barrel enclose with a quarter inch slit for cleaning. Made out of .080 Kydex/Boltaron.
Available belt attachments: FOIM belt clips in 1.5” or 1.75”, 2 Soft belt loops accommodate up to a 1.75” belt. Belt attachments are attached to the top of the holster.
Available left or right-handed Springfield Hellcat holsters

The Mod Wing

For extra concealability you can also order the Mod Wing. The Mod Wing is a piece of concealment enhancing hardware, and it allows a user’s belt to apply additional leverage to rotate the holster and the grip of the gun towards the body. This creates better concealment and less printing of the firearm/Grip. Interchangeable inserts allow the user to choose a strong medium or mild rotation, based on the user’s attire. The mod wing is an independent piece of hardware that can be removed if ordered with the holster. The Mod Wing cannot be added to holster if it was not originally ordered with one. Holsters are cut differently without the Mod Wing. SA Hellcat IWB holster

Standard AIWB

Use: Concealed carry, Non-Tuckable, Comfort level 7
Concealability 8 (add the mod wing you could push it to 9.5)

Designed to be carried at 1 o’clock, appendix carry however, can be worn at any position on the body. It is a tuck-able holster. The Standard AIWB has the same design characteristics as the Standard IWB. The difference is in the mounting and type of belt attachments. The belt attachment is mounted on the bottom of the holster on or just under the barrel. The gap that is created between the attachment in the holster is what allows the holster to be a tuck-able holster. We only use one J hook or strut.
Available belt attachments J Hooks 1.5” or 1.75”, 1 Strut and soft belt loop with pull the dot snap will accommodate up to 1.75” belt, Fat Clip accommodates up to a 1.75” belt. Ulti Clips.
Available left or right-handed

The Mod Wing

For extra concealability you can also order the Mod Wing. The Mod Wing is a piece of concealment enhancing hardware, and it allows a user’s belt to apply additional leverage to rotate the holster and the grip of the gun towards the body. This creates better concealment and less printing of the firearm/Grip. Interchangeable inserts allow the user to choose a strong medium or mild rotation, based on the user’s attire. The mod wing is an independent piece of hardware that can be removed if ordered with the holster. The Mod Wing cannot be added to holster if it was not originally ordered with one. Holsters are cut differently without the Mod Wing.

 

Standard OWB

Use: Opened carry, Range holster, Duty holster, Comfort level 9, Concealability 3

The Standard OWB has the same design characteristics as the Standard IWB. The holster looks the same as the AIWB or IWB. The differences are in the belt attachments and material thickness. The standard outside the waistband holster is made out of .093 Kydex/Boltaron. When possible, belt attachment points are reinforced. This is the weakest part of the holster. This reinforcement eliminates that.
Available belt attachments Combat loop, Tek-Lok, Drop & offsets, Paddles, TIMMS system QLS System Speed Clips and a few others. Most will accommodate up to a 2” belt.
Holsters can also be ordered with level ll retention.

Pancake Holster

Use: Open carry, Concealed carry, Comfort level 8, Concealability 6.5-8.5

The Pancake holster has all the same design characteristics as the Standard IWB. The difference is that it is not a “taco” holster. The gun is sandwiched between two pieces of .080 Kydex/Boltaron and riveted on the sides. (Maybe it should be called a sandwich holster.) Weight of the gun is distributed over 4 to 6 inches. Our pancake holster design is slightly different than most. To help with comfort and concealability the front wing is set at 35°, the back wing is set at 20°. “Wings are where the rivets go”. What this does is allows your belt to pull the back of the holster closer to your body. This is to help keep the grip from printing if you’re wearing it outside the waistband with a shirt draped over it. The gun is generally straight up and down in the holster. Small guns without lights or lasers will be tilted in the holster about 5°. Belt attachments are attached to the rivets. Depending on how many rivets are forward or back of the holster, ride height can be adjusted simply by moving the belt attachment up or down the rivets. Cant is achieved by offsetting the belt attachments. Holsters are shipped with belt attachments offset ¾ of an inch which is about 10° cant. Available left or right-handed. Belt attachments Speed Clips, Flat Loops, Infinity loops and belt loops. All available in 1.5 to 1.75 inch.

The pancake holster can also be converted into a inside the waistband holster. (IWB). All one needs to do is remove you’re outside the waistband attachments and install J hooks or struts with soft belt loops on the front side of the holster. We sell kits for that. You may also need to round some of the lower corners on your holster to aid in comfort while wearing it inside the waistband. This can be done simply by sanding. Start with 220 grit then 400.

 

 If you don’t see what you are looking for please call or Text 520 815 6940 or e mail Sales@dmeholsters.com

Check out the DME Holster List

All DME Holsters have a limited lifetime warranty! See the warranty page.

Please note any holster or mag carrier ordered color/print other than black is special order and nonrefundable.

The DME Holsters Standard IWB OWB Springfield Armory holsters are perfect for everyday carry. After that all Springfield Hellcat holsters can be outfitted with the popular lasers and lights from a variety of manufacturers such as Stream light Crimson Trace laser Max ect. Order holsters with lights & lasers here dmeholsters.com  We can also do off brand lights depending on the cost to acquire the light. Please feel free to contact If you are not finding what you’re looking for or you need more information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page Springfield Hellcat IWB holsters SA Hellcat IWB holster


American Made

Additional information

Weight 14.0 oz
Dimensions 10 × 6 × 4 in
Brand

DME Holsters

Manufacturer

DME Holsters

Share your thoughts!

4.8 out of 5 stars

5 reviews

Let us know what you think...

What others are saying

  1. Charles

    Great customer service

    Charles (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped before estimated ship time

    I bought an appendix inside waistband for my new Hellcat. I messed up and gave them the wrong optic and weapon-mounted light. Just a simple email a few days later and they changed it before shipping. I like the options and the variety of Optics and lights available with their holsters. Very solid holster

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Von

    Perfect holster

    Von (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped before estimated ship time

    This is a great holster, was trying to find a holster with the crimson trace for the hellcat and couldn’t. I put my order in about 2 weeks received my holster and couldn’t ask for a more perfect holster.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Luke B

    Almost perfect

    Luke B (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Above average

    Shipping time Shipped before estimated ship time

    The holster overall is great! Fits the hellcat with the viridian e-series green just like a glove, however it appears as though the holster was designed for a hellcat with a threaded barrel, & I selected the option without a threaded barrel. This adds a little bit of extra length to the holster, which normally would not be a big deal, but I’m a smaller guy so the added length actually ends up jabbing me in the leg when I sit down. Granted, carrying appendix isn’t the best to sit with, but this makes it particularly uncomfortable. I wore the holster for 12+ hours the other day, & by the end my leg had a pretty bad sore spot & I would almost flinch at the pain. If it wasn’t for that, it would be an absolute 5 star & I’ll continue to carry!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • timehler

      timehler (verified owner)

      Well there are several things to consider here. First the hellcat is an extremely small firearm. Generally speaking small firearms do not carry IWB/AIWB very well. They have a tendency to flip out of you pants. To combat this we generally make the holster just a bit longer all it takes is about an inch. Think about it like a sailboat that thing that hangs below the boat the keeps the boat from flipping over I don’t know what they call it, don’t know anything about boats. But by making the holster a little bit longer it serves the same purpose to keep your holster from flipping forward. I don’t know if that makes any sense to you or not. All of our holsters are generally set up to except threaded barrel. Because you ordered an appendix carry in order for us to mount the J hook in the correct place it has to extend Passed the end of your barrel/slide. The fact that you think that you you holster set up for threaded barrel is not really the issue the J hook is mounted considerably past the end of the slide. Therefore a longer holster but generally speaking that is required for such a small gun to be able to be carried inside the waistband. Tim DME Holsters

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Josh L Barfus

    Awesome Holster

    Josh L Barfus (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped before estimated ship time

    This fits my Hellcat with a Shield RMSC and Olight PL-Mini 2 Valkyrie. Very comfortable and concealable. Very happy with this holster.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Matt Sloop

    10/10

    Matt Sloop (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped at the estimated ship time

    Fits perfectly with my olight mini Valkyrie. The pancake holster with the iwb conversion clips works awesome. It allows me to completely conceal my hellcat under just a t-shirt comfortably. Will be ordering more holsters from here in the future for my wife’s and my other handguns

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up