S&W Shield holsters

(2 customer reviews)

$64.99

S&W Shield Holsters
| Outside the waistband | OWB |
| Inside the waistband | IWB | concealed carry kydex holsters |
Please check out | Holster Type FAQ |and the |Vlog | for information about our products
Estimated time to ship 5 to 6 weeks
Shipping times are estimates not a guarantee
More information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page

Please read the description at the bottom of the page
Made in America

Description

S&W Shield Holsters

The S&W Shield holster and S&W Shield 2.0 holsters is perfect for concealed carry inside the waistband and outside the waistband. Our holsters are purposely designed for the Shield 9mm and Shield 45. And they can be carried at 3 to 4 o’clock but can be ordered for appendix carry. DME Holster’s S&W Shield holster is American made. S&W M&P Shield holster
Used with the nylon injection molded belt clip or soft loops. DME holsters offers a non tuckable easy on and off holster. In addition our Smith & Wesson M&P holsters are designed to be a perfect fit for The M&P line of firearms. For instance M&P Shield 9mm to the Shield 45 ACP. Similarly M&P 9 2.0 Compact M&P 40 M2.0 4″ Compact Crimson Trace Laserguard. M&P 9 SHIELD M2.0 Integrated Crimson Trace Laser M&P 9 SHIELD M2.0 Laserguard Pro Laser/Light Combo M&P 45 2.0 4.6 as well as the original M&P line. Order any S&W M&P here

In addition We also offer holsters for the popular

Stream light TLR 6 TLR 1 TLR 2 TLR 3 TLR 4 and other rail mounted lights.

Our Kydex M&P Shield holsters can be ordered for concealed carry CCW. And outside the waistband OWB for an open carry holster. They can be order straight up and down at 0° cant for appendix carry. Or with approximately 15° cant for 3 o’clock or 4 o’clock carry. M&P Shield holster S&W Shield 2.0 holster

Holster description

Standard IWB

Use: Concealed carry, Non-Tuckable, Comfort level 7
Concealability 8 (add the mod wing you could push it to 9.5)

The Standard IWB is a “Taco” holster designed to be carried at 3 or 4 o’clock with 15° cant. However, can be ordered at 0° cant for 1 o’clock appendix carry. Holster is non tuck-able, what this means is that you cannot tuck a shirt in over the gun. It’s designed to have a shirt hang/drape over the holster. All DME Holsters are designed with a full sweat guard, inside mag release uncovered, adjustable retention, trigger guard covered, and barrel enclose with a quarter inch slit for cleaning. Made out of .080 Kydex/Boltaron.
Available belt attachments: FOIM belt clips in 1.5” or 1.75”, 2 Soft belt loops accommodate up to a 1.75” belt. Belt attachments are attached to the top of the holster.
Available left or right-handed S&W Holster M&P holster

The Mod Wing

For extra concealability you can also order the Mod Wing. The Mod Wing is a piece of concealment enhancing hardware, and it allows a user’s belt to apply additional leverage to rotate the holster and the grip of the gun towards the body. This creates better concealment and less printing of the firearm/Grip. Interchangeable inserts allow the user to choose a strong medium or mild rotation, based on the user’s attire. The mod wing is an independent piece of hardware that can be removed if ordered with the holster. The Mod Wing cannot be added to holster if it was not originally ordered with one. Holsters are cut differently without the Mod Wing.

Standard AIWB

Use: Concealed carry, Non-Tuckable, Comfort level 7
Concealability 8 (add the mod wing you could push it to 9.5)

Designed to be carried at 1 o’clock, appendix carry however, can be worn at any position on the body. It is a tuck-able holster. The Standard AIWB has the same design characteristics as the Standard IWB. The difference is in the mounting and type of belt attachments. The belt attachment is mounted on the bottom of the holster on or just under the barrel. The gap that is created between the attachment in the holster is what allows the holster to be a tuck-able holster. We only use one J hook or strut.
Available belt attachments J Hooks 1.5” or 1.75”, 1 Strut and soft belt loop with pull the dot snap will accommodate up to 1.75” belt, Fat Clip accommodates up to a 1.75” belt. Ulti Clips.
Available left or right-handed

The Mod Wing

For extra concealability you can also order the Mod Wing. The Mod Wing is a piece of concealment enhancing hardware, and it allows a user’s belt to apply additional leverage to rotate the holster and the grip of the gun towards the body. This creates better concealment and less printing of the firearm/Grip. Interchangeable inserts allow the user to choose a strong medium or mild rotation, based on the user’s attire. The mod wing is an independent piece of hardware that can be removed if ordered with the holster. The Mod Wing cannot be added to holster if it was not originally ordered with one. Holsters are cut differently without the Mod Wing.

 

Standard OWB

Use: Opened carry, Range holster, Duty holster, Comfort level 9, Concealability 3

The Standard OWB has the same design characteristics as the Standard IWB. The holster looks the same as the AIWB or IWB. The differences are in the belt attachments and material thickness. The standard outside the waistband holster is made out of .093 Kydex/Boltaron. When possible, belt attachment points are reinforced. This is the weakest part of the holster. This reinforcement eliminates that.
Available belt attachments Combat loop, Tek-Lok, Drop & offsets, Paddles, TIMMS system QLS System Speed Clips and a few others. Most will accommodate up to a 2” belt.
Holsters can also be ordered with level ll retention.

Pancake Holster

Use: Open carry, Concealed carry, Comfort level 8, Concealability 6.5-8.5

The Pancake holster has all the same design characteristics as the Standard IWB. The difference is that it is not a “taco” holster. The gun is sandwiched between two pieces of .080 Kydex/Boltaron and riveted on the sides. (Maybe it should be called a sandwich holster.) Weight of the gun is distributed over 4 to 6 inches. Our pancake holster design is slightly different than most. To help with comfort and concealability the front wing is set at 35°, the back wing is set at 20°. “Wings are where the rivets go”. What this does is allows your belt to pull the back of the holster closer to your body. This is to help keep the grip from printing if you’re wearing it outside the waistband with a shirt draped over it. The gun is generally straight up and down in the holster. Small guns without lights or lasers will be tilted in the holster about 5°. Belt attachments are attached to the rivets. Depending on how many rivets are forward or back of the holster, ride height can be adjusted simply by moving the belt attachment up or down the rivets. Cant is achieved by offsetting the belt attachments. Holsters are shipped with belt attachments offset ¾ of an inch which is about 10° cant. Available left or right-handed. Belt attachments Speed Clips, Flat Loops, Infinity loops and belt loops. All available in 1.5 to 1.75 inch.

The pancake holster can also be converted into a inside the waistband holster. (IWB). All one needs to do is remove you’re outside the waistband attachments and install J hooks or struts with soft belt loops on the front side of the holster. We sell kits for that. You may also need to round some of the lower corners on your holster to aid in comfort while wearing it inside the waistband. This can be done simply by sanding. Start with 220 grit then 400. M&P Shield holster

 

 

Need more information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page

Just a quick word about shipping times we are a small company and most the stuff that we do custom work. We offer a quality product at affordable prices that is in high demand. Holsters are made on a first-come first-served basis. We try to update our shipping times once a month. We get multiple phone calls requesting to be moved to the front of line for some extra cash that’s just not something that we can do. Orders are completed in sequence unless something is on back order i.e. you order a custom color. M&P Shield holster

S&W Shield holsters

Is made out of  black .080 Boltaron or Kydex. It’s very strong, has excellent durability, scratch resistance, and good definition. M&P Shield holster

Holster Type FAQ

All S&W Shield Holsters come standard with:

  • Made with Black .080/.93 Boltaron or Kydex  View Colors/ Patterns here
  • Nylon belt clip your choice 0° appendix carry, or approximately 15° FBI Cant
  • Sweat guard
  • Adjustable retention
  • Standard screw set
  • Made in America

If you don’t see what you are looking for please call or Text 520 815 6940 or e mail Sales@dmeholsters.com

Check out the DME Holster List

DME Holsters have a limited lifetime warranty! See the warranty page.

Please note any holster or mag carrier ordered color/print other than black is special order and nonrefundable.

DME Holsters Standard IWB OWB  Kydex holsters are perfect for everyday carry. Because all S&W Shield holsters can be outfitted with the popular lasers and lights from a variety of manufacturers such as Stream light CrimsonTrace laserMax ect. S&W Shield 2.0 holster Order holsters with lights & lasers here dmeholsters.com  S&W Shield 2.0 holster Contact us If you are not finding what you’re looking for or you need more information please text us 520 815 6940 Call us 520 815 6940 or send us an email. sales@dmeholsters.com or use the Contact Us Page 

American Made M&P Shield holster Shield Holster S&W Shield 2.0 holster S&W Shield 2.0 holster

 

Additional information

Weight 14.0 oz
Dimensions 10 × 6 × 4 in
Brand

DME Holsters

Manufacturer

DME Holsters

Share your thoughts!

5 out of 5 stars

2 reviews

Let us know what you think...

What others are saying

  1. Angie

    OMG

    Angie (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped in 3 weeks

    Oh My Goodness! I purchased a Shield M2.0 with a Crimson Trace LTG770 light and could not find a holster anywhere. I made contact with several holster companies and all told me that they didn’t make it. DME was the first and only to say yes. I put in an order and as promised I received a holster that fits perfectly. Bam! I’m in business. Great quality and good service.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. Jeff Mills

    Best choice for EDC!

    Jeff Mills (verified owner)

    Customer service Extremely Satisfied

    Customer service response time Less than hour

    Quality of product Excellent

    Shipping time Shipped in 1 week

    I’m so glad I went out in a ledge and tried DME Holsters. Everyone I know has their ‘favorites’ but I didn’t really like any of them. After tons of research I knew 2 things I wanted in my EDC holster. Made in the USA is a must and I wanted compact and comfortable. DME NAILED it! If you’re wanting an American made, comfortable holster that is very well made and has every option to meet your custom built EDC…. DME is a must!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up